How to solve auto sensor flushing system issue???

To solve an auto sensor flushing system issue, you can follow these step-by-step instructions:

Identify the problem: Determine the specific issue with the auto sensor flushing system. It could be a clogged sensor, malfunctioning valve, or electrical problem.

Gather necessary tools: Depending on the problem, you might need a few tools such as a screwdriver, pliers, wrench, multimeter, cleaning solution, and replacement parts if required.

Turn off the water supply: Locate the main water shut-off valve and turn it off to prevent any water flow while you work on the system.

Inspect the sensor: Check the sensor for any debris or dirt buildup. If the sensor is dirty, clean it gently using a soft cloth or a mild cleaning solution. Be careful not to damage the sensor.

Test the sensor: Turn the water supply back on and test the sensor by placing your hand or an object in front of it. Ensure that it detects motion and activates the flushing system. If it doesn't work, move on to the next steps.

Check the valve: Locate the flushing system's valve, which controls the water flow. Inspect it for any signs of damage or blockage. If you notice any debris or sediment, clean it or replace the valve if necessary.

Test the valve: Use a multimeter to check the electrical connections and voltage going into the valve. If there is no power, check the wiring connections and repair any damaged wires. If the valve is not functioning properly, replace it.

Check the electrical connections: Inspect the wiring connections between the sensor, valve, and power source. Ensure that they are properly connected and there are no loose or damaged wires.

Reset the system: If the issue persists, try resetting the auto sensor flushing system. Refer to the manufacturer's instructions for the specific procedure. This might involve turning off the power supply, removing the battery (if applicable), and waiting for a few minutes before reconnecting everything.

Test the system: After completing the necessary repairs or cleaning, turn on the water supply and test the auto sensor flushing system again. Make sure it operates correctly, detecting motion and flushing as intended.

Monitor for further issues: Keep an eye on the system for a few days to ensure that the problem doesn't reoccur. If it does, you may need to consult a professional plumber or contact the manufacturer for further assistance.

Remember, working with plumbing systems can be complex and might require specific knowledge or expertise. If you're not confident in your abilities, it's always recommended to seek professional help to avoid causing further damage.